Mercedes

The best or nothing

К сожалению, мы не смогли определить Ваш город (ip=3.129.92.57)
Пожалуйста, укажите его самостоятельно

Поиск по идентификационному номеру VIN

Поиск по номеру детали

Автозапчасти Mercedes

Каталог Mercedes→Категория «Легковой а/м»→Раздел «FG - шасси»→Модельный ряд «TYP 300 Sc BM 188.013 - .015»→Группа 68 - LINING AND PANELLING

Группа 68 → LINING AND PANELLING

Подгруппа 040 → LINING AND PANELLING

№ поз.	Номер детали	Название/дополнительная информация	Колич
ANTISQUEAKES
-----	A 000 983 30 91→	ANTISQUEAK AT FRONT, WALL, LATERAL PART BOTTOM, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LE	2
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 1ST FROM FRONT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	3
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 2ND FROM FRONT, LEFT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 2ND FROM FRONT, RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 3RD FROM FRONT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	2
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 4TH FROM FRONT, LEFT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 4TH FROM FRONT, RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 5TH FROM FRONT, LEFT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 5TH FROM FRONT, RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, 6TH FROM FRONT, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND	2
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, BELOW DRIVER'S SEAT, FRONT, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNES	2
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR BELOW DRIVER'S SEAT, REAR, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS,	2
-----	A 000 983 30 91→	ANTISQUEAK AT DRIVER'S CAB FLOOR, LEFT AND RIGHT OF TOE-BOARD TO DRIVER'S SEAT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKN	2
-----	A 000 983 30 91→	ANTISQUEAK LEFT AND RIGHT, FROM BELOW DRIVER'S SEAT, FRONT, TO FOLDING SEAT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS,	2
-----	A 000 983 29 91→	ANTISQUEAK AT REAR COMPARTMENT FLOOR, BELOW FOLDING SEAT, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, W	2
-----	A 000 983 29 91→	ANTISQUEAK AT LUGGAGE COMPARTMENT FLOOR ABOVE REAR AXLE, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WI	2
-----	A 000 983 29 91→	ANTISQUEAK AT LUGGAGE COMPARTMENT FLOOR, FRONT, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND L	2
-----	A 000 983 29 91→	ANTISQUEAK AT LUGGAGE COMPARTMENT FLOOR, FRONT, CENTER BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 29 91→	ANTISQUEAK AT LUGGAGE COMPARTMENT FLOOR NEXT TO SPARE WHEEL RECESS, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE TH	2
-----	A 000 983 29 91→	ANTISQUEAK AT LUGGAGE COMPARTMENT FLOOR, CENTER BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 29 91→	ANTISQUEAK AT LUGGAGE COMPARTMENT FLOOR, REAR BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 29 91→	ANTISQUEAK AT COVER PLATE, LUGGAGE COMPARTMENT, BEHIND BACKREST OF FOLDING SEAT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICK	1
-----	A 000 983 23 92→	ANTISQUEAK AT DRIVER'S CAB FLOOR, LEFT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 23 92→	ANTISQUEAK AT DRIVER'S CAB FLOOR, RIGHT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 23 92→	ANTISQUEAK AT SIDE PART, LEFT AND RIGHT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	2
-----	A 000 983 23 92→	ANTISQUEAK AT FLOOR, LEFT AND RIGHT, IN REAR COMPARTMENT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	2
-----	A 000 983 22 92→	ANTISQUEAK AT PROPELLER SHAFT, REAR COMPARTMENT WAFFLE FELT 10 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK LEFT AND RIGHT, GLOVE COMPARTMENT BIT. CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	2
-----	A 000 983 30 91→	ANTISQUEAK CENTER, GLOVE COMPARTMENT BIT. CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 30 91→	ANTISQUEAK HEATING CHANNEL BIT. CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 29 91→	ANTISQUEAK, FRONT WALL BIT. CORK FELT, 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	2
-----	A 000 983 03 92→	ANTISQUEAK IN FRONT OF RADIO FELT, BLACK 6 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 03 92→	ANTISQUEAK IN FRONT OF RADIO IN FRONT OF GLOVE COMPARTMENT FELT, BLACK 6 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 03 92→	ANTISQUEAK IN FRONT OF RADIO BATTERY MOUNTING FELT, BLACK 6 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 31 92→	ANTISQUEAK SUPPORTING FRAME FELT, BLACK 1 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 31 92→	ANTISQUEAK CROSS MEMBER, RIGHT FELT, BLACK 1 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 31 92→	ANTISQUEAK CROSS MEMBER, LEFT FELT, BLACK 1 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 30 92→	ANTISQUEAK ON DEFROSTER NOZZLE, LEFT AND RIGHT FELT, BLACK 2 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	2
-----	A 000 983 30 92→	ANTISQUEAK REAR PART, TOP FELT, BLACK 2 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	3
-----	A 000 983 07 92→	ANTISQUEAK LEFT, AT SCOOP WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 07 92→	ANTISQUEAK RIGHT, AT SCOOP WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 07 92→	ANTISQUEAK LEFT, AT MUDGUARD WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 07 92→	ANTISQUEAK RIGHT, AT MUDGUARD WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 07 92→	ANTISQUEAK LEFT, AT AIR CHANNEL, INTERIOR WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 000 983 07 92→	ANTISQUEAK RIGHT, AT AIR CHANNEL, INTERIOR WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH	1
-----	A 30 188 680 01 26→	ANTISQUEAK, DASHBOARD, LEFT	1
-----	A 30 188 680 02 26→	ANTISQUEAK, DASHBOARD, RIGHT	1
-----		COUNTERSUNK LENS-HD. SCREW S 3,9X16 DIN 7973 FOR ANTISQUEAK AT DASHBOARD, BOTTOM VERCHROMT, CHROM. -PLATED	16
-----	A 000 985 10 62→	COUNTERSUNK WASHER FOR ANTISQUEAK AT DASHBOARD, BOTTOM VERCHROMT, CHROM. -PLATED	16
-----	A 30 188 682 01 97→	RUBBER UNDERLAYER, BLACK, AT SIDE MEMBER, FRONT, LEFT AND RIGHT	2
-----	A 30 188 682 02 97→	RUBBER UNDERLAYER BLACK, AT FRAME ELONGATION, FRONT	2
-----	A 000 983 02 92→	ANTISQUEAK LEFT, AT AIR CHANNEL, EXTERIOR WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 02 92→	ANTISQUEAK RIGHT, AT AIR CHANNEL, EXTERIOR WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 02 92→	ANTISQUEAK CONNECTION FITTING, LEFT WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 02 92→	ANTISQUEAK CONNECTION FITTING, RIGHT WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 23 92→	ANTISQUEAK LEFT, FLOOR, REAR AXLE WAFFLE FELT, 15 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 23 92→	ANTISQUEAK RIGHT, FLOOR, REAR AXLE WAFFLE FELT, 15 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 12 92→	ANTISQUEAK, UPHOLSTERY FELT, 2-MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	TRANSMISSION COVER PLATE BITUMEN FELT, 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 30 91→	RIGHT BITUMEN FELT, 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	2
-----	A 000 983 30 91→	LEFT BITUMEN FELT, 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 983 22 92→	FELT MAT, WAFFLE FELT, BROWN, 10-MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH	1
-----	A 000 988 33 79→	LOWER PART, CHROM. -PLATED FOR CARPET AT TRANSMISSION, COVER PLATE	4
CARPET FOR TRANSMISSION COVER PLATE
1	A 30 188 680 01 38→	COVER PLATE WHEN ORDERING STATE COLOUR AND BODY NO.	1
2	A 000 988 01 79→	TENAX LOCK, UPPER PART, CHROM. -PLATED AT CARPET, REAR AND CENTER FOR CARPET AT TRANSMISSION COVER PLATE	4
-----		COUNTERSUNK LENS-HD. SCREW CHROM. -PLATED S 3,9X19 DIN 7973 FOR CARPET AT TRANSMISSION COVER PLATE	2
-----	A 000 985 06 62→	COUNTERSUNK SCREW, CHROM. -PLATED FOR CARPET AT TRANSMISSION COVER PLATE	2
3	A 30 188 680 02 38→	CARPET, TRANSMISSION COVER PLATE, REAR REINFORCEMENT DOME WHEN ORDERING STATE COLOUR AND BODY NO.	1
4	A 12 136 680 01 39→	COVER FOR REFUELLING DEVICE AND REAR AXLE AT LUGGAGE COMPARTMENT FLOOR	2
5	A 12 136 693 00 11→	SEAL FOR COVER AT LUGGAGE COMPARTMENT FLOOR AND FOR COVER AT REAR AXLE	2
-----		CYLINDER SCREW AM 6X12 DIN 84 - 4S FOR COVER AT LUGGAGE COMPARTMENT FLOOR	6
6	A 136 984 01 52→	COVER FOR SHOCK ABSORBER RUBBER BLACK	4
-----	A 136 984 02 52→	COVER AT LUGGAGE COMPARTMENT FLOOR, REAR, RIGHT FOR LICENCE PLATE LIGHTING RUBBER BLACK	1
-----	A 136 984 02 52→	COVER AT TRANSMISSION COVER, LEFT RUBBER BLACK	1
PROTECTIVE PLATE
7	A 30 188 683 00 60→	PROTECTIVE PLATE DASHBOARD, RIGHT REAR EXHAUST PIPE	1
-----		CYLINDER SCREW AM 6X18 DIN 84-4 S FOR PROTECTIVE PLATE AT DASHBOARD	4
-----		LOCK WASHER B 6 DIN 127 FOR PROTECTIVE PLATE AT DASHBOARD	4
-----		WASHER A 6 DIN 9021 FOR PROTECTIVE PLATE AT DASHBOARD	4
8	A 30 188 683 00 61→	PROTECTIVE PLATE MAIN FLOOR, FRONT, RIGHT ABOVE EXHAUST PIPE	1
-----		CYLINDER SCREW AM 6X18 DIN 84 - 4S FOR PROTECTIVE PLATE AT MAIN FLOOR, FRONT	4
-----		LOCK WASHER B 6 DIN 127 FOR PROTECTIVE PLATE AT MAIN FLOOR, FRONT	4
-----		WASHER A 6 DIN 9021 FOR PROTECTIVE PLATE AT MAIN FLOOR, FRONT	4
9	A 30 188 683 01 62→	PROTECTIVE PLATE MAIN FLOOR, REAR, RIGHT ABOVE EXHAUST PIPE	1
-----		CYLINDER SCREW AM 6X18 DIN 84 - 4S FOR PROTECTIVE PLATE AT MAIN FLOOR, REAR	10
-----		LOCK WASHER B 6 DIN 127 FOR PROTECTIVE PLATE AT MAIN FLOOR, REAR	10
-----		WASHER A 6 DIN 9021 FOR PROTECTIVE PLATE AT MAIN FLOOR, REAR	10
10	A 30 188 680 00 22→	PROTECTIVE PLATE IN ENGINE ROOM, RIGHT	1
-----		HEX. -HD. SCREW M 6X15 DIN 933-8G FOR PROTECTIVE PLATE AT MAIN FLOOR	4
-----		LOCK WASHER B 6 DIN 127 FOR PROTECTIVE PLATE AT MAIN FLOOR	4
COVER
11	A 30 188 680 05 40→	COVER, LEFT FOR DRIVER'S CAB FLOOR WHEN ORDERING STAT COLOUR AND BODY NO.	1
12	A 30 188 680 06 40→	COVER, RIGHT FOR DRIVER'S CAB FLOOR WHEN ORDERING STAT COLOUR AND BODY NO.	1
-----	A 000 988 14 80→	BUTTON FOR COVER AT DRIVER'S CAB FLOOR	3
-----		CYLINDER SCREW AM 4X25 DIN 84-4S FOR COVER AT DRIVER'S CAB FLOOR	2
-----		LOCK WASHER B 4 DIN 127 FOR COVER AT DRIVER'S CAB FLOOR	2
-----		HEX. NUT M 4 DIN 934-5 S FOR COVER AT DRIVER'S CAB FLOOR	2
-----	A 000 988 23 80→	BUTTON FOR COVER AT DRIVER'S CAB FLOOR	1
-----		CYLINDER SCREW S 3,5X32 DIN 7971 FOR COVER AT DRIVER'S CAB FLOOR	2
16	A 30 188 680 01 41→	REMOVABLE CARPET, LEFT BELOW AT DRIVER'S SEAT WHEN ORDERING STATE COLOUR AND BODY NO.	1
17	A 30 188 680 02 41→	REMOVABLE CARPET, RIGHT BELOW AT DRIVER'S SEAT WHEN ORDERING STATE COLOUR AND BODY NO.	1
18	A 136 988 09 81→	BALL FOR REMOVABLE CARPET AT REAR COMPARTMENT FLOOR	4
-----		BUTTONHEAD SCREW S 2,9X9,5 DIN 7974 FOR REMOVABLE CARPET AT REAR COMPARTMENT FLOOR	4
19	A 30 188 680 00 41→	CARPET ABOVE PROPELLER SHAFT PASSAGE AND REAR COMPARTMENT WHEN ORDERING STATE COLOUR AND BODY NO.	1
20	A 30 188 680 01 43→	CARPET, LEFT, VELOUR CARPET FOR SIDE MEMBER WHEN ORDERING STATE COLOUR AND BODY NO.	1
21	A 30 188 680 02 43→	CARPET, RIGHT, VELOUR CARPET FOR SIDE MEMBER WHEN ORDERING STATE COLOUR AND BODY NO.	1
22	A 30 188 680 01 45→	CARPET, LEFT, VELOUR CARPET AT DRIVER'S SEAT SUPPORT, EXTERIOR WHEN ORDERING STATE COLOUR AND BODY NO.	1
23	A 30 188 680 02 45→	CARPET, RIGHT, VELOUR CARPET AT DRIVER'S SEAT SUPPORT, EXTERIOR WHEN ORDERING STATE COLOUR AND BODY NO.	1
24	A 30 188 680 00 45→	CARPET VELOUR CARPET, BETWEEN DRIVER'S SEAT, LEFT AND RIGHT WHEN ORDERING STATE COLOUR AND BODY NO.	1
RUBBER COVER
25	A 30 188 680 00 42→	RUBBER COVER,	1
26	A 136 988 09 81→	BALL, PUSH-BUTTON, LOWER PART FOR RUBBER COVER AT LUGGAGE COMPARMENT FLOOR	2
-----		BUTTONHEAD SCREW S 2,9X9,5 DIN 7974 FOR PUSH-BUTTON, LOWER PART, AT LUGGAGE COMPARTMENT FLOOR	2
27	A 30 188 684 01 05→	RUBBER MAT, 2 MM FOR SPARE WHEEL RECESS, BOTTOM	2
28	A 30 188 684 02 05→	RUBBER MAT, 2 MM FOR SPARE WHEEL RECESS, LATERAL, EXTERIOR	2
29	A 30 188 684 00 05→	RUBBER MAT, 2 MM FOR SPARE WHEEL RECESS, LATERAL, INTERIOR	2
30	A 30 188 684 01 21→	COVER RAIL, LEFT, SPARE WHEEL RECESS 850 MM LONG	1
31	A 30 188 684 02 21→	COVER RAIL, RIGHT, SPARE WHEEL RECESS 850 MM LONG	1
32	A 30 188 686 01 28→	PANEL, LEFT AT SIDE MEMBER	1
33	A 30 188 686 02 28→	PANE, RIGHT AT SIDE MEMBER	1
-----		CYLINDER SCREW Z 2,9X9,5 DIN 7971	16
-----		COUNTERSUNK SCREW S 2,9X9,5 DIN 7972-4 FOR PANEL AT SIDE MEMBER LEFT AND RIGHT TOP	10
34	A 000 987 13 30→	WELT ARTIFICIAL LEATHER WITH PLASTIC INSERT FOR PANEL AT SIDE MEMBER LEFT AND RIGHT TOP WHEN ORDERING STATE COLOUR AND LENGTH	2
35	A 30 188 686 01 20→	ENTRANCE SILL, LEFT, DRIVER'S DOOR 1220 MM LONG	1
36	A 30 188 686 02 20→	ENTRANCE SILL, RIGHT, DRIVER'S DOOR 1220 MM LONG	1
37	A 000 987 29 30→	SUPPORTING WELT, 1220-MM LONG RUBBER, BLACK WHEN ORDERING STATE LENGTH	2
-----		COUNTERSUNK SCREW S 2,9X13 DIN 7972 FOR ENTRANCE SILL AT SIDE MEMBER	12
38	A 10 186 687 00 37→	CUP FOR PEDAL SEAL	2
PROTECTION PLATE AT FRONT WALL
40	A 30 188 680 01 72→	PROTECTION PLATE, LEFT AT FRONT WALL	1
41	A 30 188 680 02 72→	PROTECTION PLATE, RIGHT AT FRONT WALL	1
-----	A 000 987 40 36→	SEALING RUBBER, 450-MM LONG WHEN ORDERING STATE LENGTH	2
43	A 30 188 680 01 74→	PROTECTION PLATE, BOTTOM, LEFT BETWEEN DRIVER'S DOOR AND FRONT MUDGUARD	1
44	A 30 188 680 02 74→	PROTECTION PLATE, BOTTOM, RIGHT BETWEEN DRIVER'S DOOR AND FRONT MUDGUARD	1
-----	A 000 989 24 85→	INTERM. LAYER, MOULDING RUBBER FOR PROTECTION PLATE, TOP RESP. BOTTOM AT BODY SIDE MEMBER WHEN ORDERING STATE LENGTH	4
45	A 000 987 82 35→	RUBBER PROFILE, BLACK, 1220-MM LONG BETWEEN ENGINE HOOD AND DASHBOARD WHEN ORDERING STATE LENGTH	1
46	A 10 186 688 01 20→	MOUNTING RAIL, LATERAL, LEFT FOR PANEL	1
47	A 10 186 688 02 20→	MOUNTING RAIL, LATERAL, RIGHT FOR PANEL	1
48	A 30 188 680 01 80→	PANEL, LATERAL, LEFT FOR FRONT WALL WHEN ORDERING STATE COLOUR AND BODY NO.	1
49	A 30 188 680 02 80→	PANEL, LATERAL, RIGHT FOR FRONT WALL WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 30 188 680 02 81→	PANEL UPHOLSTERY LEATHER FOR REINFORCEMENT DOME WHEN ORDERING STATE COLOUR AND BODY NO.	1
50	A 30 188 690 02 33→	COVER FOR SPARE WHEEL RECESS	1
51	A 000 987 30 40→	BUFFER BUTTON, RUBBER FOR SEAT SPARE WHEEL RECESS	1
52	A 30 188 693 03 30→	WATER BAFFLE PLATE, LEFT AT WHEEL HOUSE REAR	1
53	A 30 188 693 04 30→	WATER BAFFLE PLATE, RIGHT AT WHEEL HOUSE REAR	1
-----		CYLINDER SCREW S 4,2X9,5 DIN 7971 FOR WATER BAFFLE PLATE AT WHEEL HOUSE	8
-----	A 000 989 19 85→	MOULDING RUBBER FOR WATER BAFFLE PLATE AT WHEEL HOUSE WHEN ORDERING STATE LENGTH	4
-----	A 50 188 690 03 40→	PANEL, REAR PART, LATERAL, LEFT FOR LOCKER NEXT TO FOLDING SEAT VELOUR CARPET WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 04 40→	PANE, REAR PART, LATERAL, RIGHT FOR LOCKER NEXT TO FOLDING SEAT VELOUR CARPET WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 000 983 02 84→	COVER FOR LOG AT LOCKER UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH	2
-----	A 000 983 02 84→	COVER, TOP, LEFT AND RIGHT UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH	2
-----	A 000 983 02 84→	COVER FOR LID, LOCKER UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH	2
-----	A 000 983 02 84→	COVER LEFT AND RIGHT FOR LOCKER, INTERIOR UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH	2
-----	A 50 188 694 00 80→	HINGE, CHROM. -PLATED FOR LID NEXT TO FOLDING SEAT	2
66	A 50 188 690 00 40→	LINING FOR REAR WALL BEHIND FOLDING SEAT, BACKREST VELOUR CARPET WHEN ORDERING STATE COLOUR AND BODY NO.	1
75	A 50 188 690 00 43→	PANEL FOR TOP COMPARTMENT WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----		COUNTERSUNK SCREW S 3,9X9,5 DIN 7972 FOR PANEL AT CROSS MEMBER	6
-----		COUNTERSUNK WASHER 4 N 56 D FOR PANEL AT CROSS MEMBER	6
-----	A 000 983 02 84→	COVER AT REAR WALL BRACKET UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 01 41→	PANEL, LEFT FOR REAR SIDE PART, ABOVE LOCKER WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 02 41→	PANEL, RIGHT FOR REAR SIDE PART, ABOVE LOCKER WHEN ORDERING STATE COLOUR AND BODY NO.	1
86	A 50 188 690 00 41→	PANEL FOR REAR WALL WHEN ORDERING STATE COLOUR AND BODY NO.	1
CARPET FOR LUGGAGE COMPARTMENT
-----	A 50 188 690 05 40→	CARPET, LEFT FOR LUGGAGE COMPARTMENT AT WHEEL HOUSE WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 06 40→	CARPET, RIGHT FOR LUGGAGE COMPARTMENT AT WHEEL HOUSE WHEN ORDERING STATE COLOUR AND BODY NO.	1
92	A 30 188 690 09 40→	CARPET LEFT IN LUGGAGE COMPARTMENT, REAR SIDE PART, REAR WHEN ORDERING STATE COLOUR AND BODY NO.	1
93	A 30 188 690 10 40→	CARPET, RIGHT IN LUGGAGE COMPARTMENT, REAR SIDE PART, REAR WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 08 40→	CARPET, LEFT IN LUGGAGE COMPARTMENT, REAR SIDE PART, FRONT WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 09 40→	CARPET, RIGHT IN LUGGAGE COMPARTMENT, REAR SIDE PART, FRONT WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----	A 50 188 690 10 40→	CARPET IN LUGGAGE COMPARTMENT FOR REAR WALL WHEN ORDERING STATE COLOUR AND BODY NO.	1
-----		COUNTERSUNK LENS-HD. SCREW, CHROM. -PL. S 2,9X9,5 DIN 7973 FOR CARPET AT WHEEL HOUSE	4
-----	A 000 985 09 62→	COUNTERSUNK WASHER, CHROM. -PLATED FOR CARPET AT WHEEL HOUSE	4
105	A 30 188 690 08 40→	CARPET IN LUGGAGE COMPARTMENT ABOVE REAR AXLE WHEN ORDERING STATE COLOUR AND BODY NO.	1
106	A 136 988 09 81→	BALL, CHROM. -PLATED FOR PUSHBUTTON, LOWER PART, AT LUGGAGE COMPARTMENT FLOOR	6
-----		BUTTONHEAD SCREW S 2,9X9,5 DIN 7974 FOR PUSHBUTTON, LOWER PART, AT LUGGAGE COMPARTMENT FLOOR	6
-----	A 000 983 21 91→	REINFORCEMENT FOR TOP, COMPARTMENT WHEN ORDERING STATE THICKNESS LENGTH AND WIDTH	1
-----	A 000 983 13 92→	INTERM. LAYER FOR TOP, COMPARTMENT WHEN ORDERING STATE THICKNESS LENGTH AND WIDTH	1
-----	A 000 983 01 84→	COVER FOR REINFORCEMENT, TOP COMPARTMENT, FRONT AND REAR WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH	1
-----	A 000 983 30 92→	PAD, FELT CLOTH, BLACK FOR TOP COMPARTMENT BASE WHEN ORDERING STATE LENGTH AND WIDTH	1
DOME
COVER RAIL AND TROUGH
ORNAMENTAL BAR
138	A 30 188 690 01 83→	ORNAMENTAL BAR, LEFT FOR FRONT WALL, LATERAL DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED	1
139	A 30 188 690 02 83→	ORNAMENTAL BAR, RIGHT FOR FRONT WALL, LATERAL DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED	1
140	A 000 987 02 31→	WELT FOR ORNAMENTAL BAR AT FRONT WALL WHEN ORDERING STATE COLOUR AND LENGTH	1
141	A 000 987 02 31→	WELT FOR ORNAMENTAL BAR AT FRONT WALL WHEN ORDERING STATE COLOUR AND LENGTH	1
142	A 30 188 698 01 17→	SLIDE PIECE, LEFT FOR ORNAMENTAL BAR AT FRONT WALL PROFIL-NR. 000 985 03 36	1
143	A 30 188 698 02 17→	SLIDE PIECE, RIGHT FOR ORNAMENTAL BAR AT FRONT WALL PROFIL-NR. 000 985 03 36	1
-----		COUNTERSUNK SCREW S 3,9X16 DIN 7972 FOR ORNAMENTAL BAR AT FRONT WALL	4
150	A 30 188 690 01 80→	ORNAMENTAL BAR, LEFT FOR REAR SIDE PART, BOTTOM PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED	1
151	A 30 188 690 02 80→	ORNAMENTAL BAR, RIGHT FOR REAR SIDE PART, BOTTOM PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED	1
152	A 000 987 02 31→	WELT, ARTIFICIAL LEATHER WITH STRING INSERT FOR ORNAMENTAL BAR, LEFT WHEN ORDERING STATE COLOUR AND LENGTH	1
153	A 000 987 02 31→	WELT, ARTIFICIAL LEATHER WITH STRING INSERT FOR ORNAMENTAL BAR, RIGHT WHEN ORDERING STATE COLOUR AND LENGTH	1
-----		HEX. NUT M 5 DIN 934-5 S FOR ORNAMENTAL BAR AT REAR SIDE PART	8
-----		LOCK WASHER B 5 DIN 127 FOR ORNAMENTAL BAR AT REAR SIDE PART	8
154	A 000 987 02 41→	UNDERLAYER FOR ORNAMENTAL BAR AT REAR SIDE PART	8
155	A 000 984 03 55→	UNDERLAYER FOR ORNAMENTAL BAR AT REAR SIDE PART	8
-----	A 50 188 690 01 81→	ORNAMENTAL BAR, LEFT AT EDGE, REAR SIDE PART, BELOW TOP PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED	1
-----	A 50 188 690 02 81→	ORNAMENTAL BAR, RIGHT AT EDGE, REAR SIDE PART, BELOW TOP PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED	1
-----		HEX. NUT M 4 DIN 934-5 S FOR ORNAMENTAL BAR AT REAR SIDE PART	10
-----		LOCK WASHER B 4 DIN 127 FOR ORNAMENTAL BAR AT REAR SIDE PART	10
162	A 000 984 03 55→	WASHER FOR ORNAMENTAL BAR AT REAR SIDE PART	10
171	A 50 188 710 03 57→	LID, LATERAL, LEFT WHEN ORDERING STATE COLOUR OF COVER AND BODY NO.	1
172	A 50 188 710 04 57→	LID, LATERAL, RIGHT WHEN ORDERING STATE COLOUR OF COVER AND BODY NO.	1
-----		COUNTERSUNK WOOD SCREW CHROM. -PLATED 3X15 DIN 97 ST FOR LID AT LOCKER AND HINGE	16
176	A 136 988 00 60→	ARRESTING LOCK FOR ARRESTING OF BACKREST OF FOLDING SEAT	2
177	A 30 136 930 00 51→	BUTTON WITH ESCUTCHEON	2
-----		COUNTERSUNK LENS-HD. SCREW, CHROM. -PLATED AM 5X25 DIN 91 FOR BUTTON WITH ESCUTCHEON AT SIDE PART	4
179	A 30 188 711 00 29→	COVER PLATE, CHROM. -PLATED ABOVE ARRESTING LOCK	2
-----		COUNTERSUNK WOOD SCREW 4X20 DIN 97 ST FOR COVER PLATE AND ARRESTING LOCK AT SIDE PART, LEFT AND RIGHT	4

B68040Z26001.051209
[image]